Monty Wear-Resistant Belts (Monty Wear-Resistant Belt) — Folder-Gluer Belts with L-Series High-Wear Surfaces

Monty Wear-Resistant Belts (Monty Wear-Resistant Belt) The belts are mainly used as

Feeder belts on carton folding machines, labeling and creasing machines

— 

— Acceleration belts in tinplate processing, packaging and gluing machines Folder belts on heavy-duty folding machines in the heavy carton and corrugated board industry

— 

— 

Conveyor belts with a high coefficient of friction Monty Wear-Resistant Belts (Monty Wear-Resistant Belt) with L-series surfaces

— The conveyor belts feature the following characteristics Good grip

— 

— 

— High coefficient of friction High wear resistance

— 

Feeder belts / folder belts 1) When ordering, please state the total thickness after the coating letter L or U, e.g.

R 10/2 – L 8. 2) Within the total thickness, the thickness may be specified in tenths of 1 mm.

3) Depending on the coating thickness.

Installation elongation: *6% (UU 20 U – L) or 4% (UU 60 U – L) * Determined in accordance with ISO 21181:2005 *2 Shaft load at 1% elongation, measured in N/mm belt width. *3 Under normal external conditions, the minimum permissible roller (or pulley) diameter depends on the belt thickness.

Low temperatures or particularly low humidity require larger diameters. Folder-gluer belts 1) When ordering, please state the total thickness after the coating letter L or U, e.g.

R 10/2 – L 8. 2) Non-ground products may be available in the following thicknesses: T 1 – L = 3.5/4.5/6/7 mm T 2 – L = 5/6.5/8.5/9.5/10.5/12.5 mm 3) Within the total thickness, the thickness may be specified in tenths of 1 mm.

T 1 – L = 3.5/4.5/6/7 mm

T 2 – L = 5/6.5/8.5/9.5/10.5/12.5 mm

4) On request * Determined in accordance with ISO 21181:2005 * Under normal external conditions, the minimum permissible roller (or pulley) diameter depends on the belt thickness. Low temperatures or particularly low humidity require larger diameters Forms of supply

Open roll material

— Belts spliced with mechanical fasteners

— 

— Finished belts spliced to size